Faure FOA2160ZXP Bedienungsanleitung PDF herunterladen (Seite 17)

3. Close the oven door halfway to the first

opening position. Then pull forward and remove

the door from its seat.

4. Put the door on a soft cloth on a stable surface.

5. Hold the door trim (B) on the top edge of the

door at the two sides and push inwards to

release the clip seal.

6. Pull the door trim to the front to remove it.

7. Hold the door glass panels by their top edge

and carefully pull them out one by one. Start

from the top panel. Make sure the glass slides

out of the supports completely.

8. Clean the glass panels with water and soap.

Dry the glass panels carefully.

When the cleaning is completed, install the glass

panels and the oven door. Do the above steps in

the opposite sequence.

Make sure that you put the glass panels (A and B)

back in the correct sequence. The first panel (A)

has a decorative frame. The screen-printing zone

must face the inner side of the door. Make sure that

after the installation the surface of the glass panel

frame (A) on the screen-printing zones is not rough

when you touch it.

A B

Make sure that you install the middle panel of glass

in the seats correctly.

REPLACING THE LAMP

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Faure FOA2160ZXP Bedienungsanleitung Seite 17